hi averyone
i get A125F WITH FRP LOCK NOT WORK WITH ANY SOLUTION
itry to downgrade with A125FXXU1ATKC but now phone work with black screen.
nb lcd not change is original. how get correct file
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.up + vol.down and insert USB cable).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: SM-A125F
Software version: 42.10
File analysis... OK
Total file size: 0x162D7679F (5677 Mb)
Searching USB Flash interface... COM28 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending preloader.img.lz4... OK
Sending lk-verified.img.lz4... OK
Sending param.bin.lz4... OK
Sending up_param.bin.lz4... OK
Sending vbmeta.img.lz4... OK
Sending efuse.img.lz4... OK
Sending boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending dtbo.img.lz4... OK
Sending super.img.lz4... OK
Sending userdata.img.lz4... OK
Sending md_udc.img.lz4... OK
Sending scp-verified.img.lz4... OK
Sending spmfw-verified.img.lz4... OK
Sending sspm-verified.img.lz4... OK
Sending tee-verified.img.lz4... OK
Sending tzar.img.lz4... OK
Sending vbmeta.img.lz4... OK
Sending vbmeta_samsung.img.lz4... OK
Sending md1img.img.lz4... OK
Sending cache.img.lz4... OK
Sending omr.img.lz4... OK
Sending prism.img.lz4... OK
Sending optics.img.lz4... OK
Flashing done (time - 00:03:47)
Done with Samsung Tool PRO v.42.10